Western Australia
Past Event
Tue 21 March 2017 – Thu 23 March 2017

Gas PE Infrastructure Construction for New Sub Divisions (3 Days) – March

MARCH 6TH – 8TH

The Gas PE Infrastructure Construction for New Sub Divisions is designed to give pipe laying contractors, both principals and employees, accreditation to lay gas pipe in common trenches. Accreditation lasts for 2 years. (more…)

 Array
(
)

EVENT DETAILS

Start Tue 21 March 2017
End Thu 23 March 2017
Past Event
Mon 20 March 2017 – Wed 22 March 2017

Basic Traffic Management & Traffic Controller

Course Dates:

3 Day Course
FEBRUARY 27 – 1
MARCH 6-8
MARCH 20-22
MARCH 27-29
APRIL 3-5

1 Day Refresher Course
MARCH 2

 

Course Location: Ascot – Can travel anywhere in WA to deliver a course, or run Group Courses for Employers
Full & Refresher Courses Available

This three day course provides participants the theory and practical skills required to implement traffic management and control traffic for works on roads. Ensuring traffic flow is maintained and the safety risk to all road users and workers is minimised.

(more…)

 Array
(
    [0] => Array
        (
            [date_issued] => 
            [file] => http://www.ccfwa.com.au/wp-content/uploads/2014/10/TRN-PRO-016-FRM-07-Enrolment-Form_4.pdf
            [name] => Training Enrolment Form
        )

    [1] => Array
        (
            [date_issued] => Monday 11 April, 2016
            [file] => http://www.ccfwa.com.au/wp-content/uploads/2014/08/CCF-Terms-Conditions-for-Short-Course-Bookings.pdf
            [name] => Short Course Terms & Conditions
        )

)

EVENT DETAILS

Start Mon 20 March 2017
End Wed 22 March 2017
Venue CCF WA Skill Centre
Address

Jandakot, WA

View Google Map

EVENT ORGANISER

Organiser Alycia Wilkinson
Phone 9414 1486
Website http://www.ccfwa.com.au
Email awilkinson@ccfwa.com.au
Past Event
Mon 20 March 2017 – Fri 24 March 2017

Dogging

CPCCLDG3001A Licence to Perform Dogging

The aim of this course is to provide participants with the knowledge and practical skills required to demonstrate competency in the application of slinging techniques, selection and inspection of lifting gear and/or the directing of the crane/ operator in the movement of the load.

Designed For

The course is designed for those who intend to work with cranes and also who may be required to dog loads with load shifting equipment. 

Expected Outcomes

This unit is based on the National Standard for Licensing Persons Performing High Risk Work and requires the operator to be able to:

  • Plan the job
  • Select and inspect equipment
  • Prepare site and equipment
  • Perform task
  • Shut down job and clean up

 

Entry Requirements

Participants must be at least 18 years of age and can use the English language at a level that enables the safe performance of high risk as specified in the competency standards.

On Completion

Successful completion of the assessment requirements will provide participants with a Statement of Attainment for CPCCLDG3001A Licence to perform dogging.

Dates

January            16th – 20th
February          6th – 10th         
February          27th – 3rd March
March              20th – 24th
April                3rd – 7th
May                 1st – 5th           
May                 22nd – 26th
June                 12th – 16th 

 

Member Course Cost    $940
CTF Subsidy                   $658
Total Cost                       $282

Non Member Course Cost  $1035
CTF Subsidy                         $724.50
Total Cost                             $310.50

We can process your Worksafe application including photo ID, for an extra fee of $120+GST

This course is delivered by IFAP, RTO #5044

Image result for ifap

 Array
(
)

EVENT DETAILS

Start Mon 20 March 2017
End Fri 24 March 2017
Past Event
Thu 9 March 2017 – Fri 10 March 2017

Forklift

TLILIC2001A Licence to Operate a Forklift Truck

The aim of this course is to provide participants with the knowledge and practical skills required to be able plan the work, conduct routine checks on the forklift, shift loads in a safe manner, and shut down and secure the equipment after completion of operations.

Designed For

The course is designed for those who have minimal or no practical experience to safely operate a forklift truck. Experienced operators can attend a one day theory and practical assessment.

Expected Outcomes

This unit is based on the National Standard for Licensing Persons Performing High Risk Work and requires the operator to be able to:

  • Plan the work
  • Conduct routine checks of the forklift
  • Shift loads in a safe manner
  • Shutdown and secure the equipment after the completion of operations

Entry Requirements

Participants must be at least 18 years of age and can use the English language at a level that enables the safe performance of high risk as specified in the competency standards.

On Completion

Successful completion of the assessment requirements will provide participants with a Statement of Attainment for TLILIC2001A Licence to operate a forklift truck.

Dates

March              2nd – 3rd           9th – 10th          16th – 17th       
March              23rd – 24th        29th – 30th
April                4th – 5th            19th – 20th
May                 4th – 5th            18th – 19th        24th – 25th
June                 1st – 2nd            8th – 9th            14th – 15th        22nd – 23rd 

 ** 1 Day Courses Available for Experienced Drivers – Assessment Only **

Member Course Cost    $400
CTF Subsidy                   $280
Total Cost                       $120

Non Member Course Cost  $440
CTF Subsidy                         $308
Total Cost                             $132

We can process your Worksafe application including photo ID, for an extra fee of $120+GST

This course is delivered by IFAP, RTO #5044

Image result for ifap

 Array
(
)

EVENT DETAILS

Start Thu 9 March 2017
End Fri 10 March 2017
Past Event
Thu 9 March 2017 – Fri 10 March 2017

EWP

TLILIC2005A Licence to Operate a Boom-type Elevating Work Platform (boom length 11 metres or more)

The aim of this course is to provide participants with the knowledge and practical skills required to be able plan the work, conduct routine checks, set up elevating work platform, operate elevating work platform and shut down and secure elevating work platform (boom length 11 metres or more).

Designed For

The course is designed for those who intend to work with and safely operate a elevating work platform greater than 11 metres or more.

Expected Outcomes

This unit is based on the National Standard for Licensing Persons Performing High Risk Work and requires the operator to be able to:

  • Plan work
  • Conduct routine checks
  • Set up elevating work platform
  • Operate elevating work platform
  • Shut down and secure elevating work platform

Entry Requirements

Participants must be at least 18 years of age and can use the English language at a level that enables the safe performance of high risk as specified in the competency standards.

On Completion

Successful completion of the assessment requirements will provide participants with a Statement of Attainment for TLILIC2005A Licence to operate a boom-type elevating work platform (boom length 11 metres or more).

Dates

March              9th – 10th           14th – 15th         20th – 21st         27th –  28th 
April                 6th – 7th             12th – 13th         27th – 28th
May                  2nd – 3rd            11th – 12th         15th – 16th        
May                  22nd – 23rd        29th – 30th        
June                  8th – 9th             12th – 13th         19th – 20th         27th – 28th  

 

Member Course Cost    $332
CTF Subsidy                   $232.40
Total Cost                       $99.60

Non Member Course Cost  $370
CTF Subsidy                         $248
Total Cost                             $122

We can process your Worksafe application including photo ID, for an extra fee of $120+GST

This course is delivered by IFAP, RTO #5044

Image result for ifap

 Array
(
)

EVENT DETAILS

Start Thu 9 March 2017
End Fri 10 March 2017
Past Event
Fri 3 March 2017

Gas Test Atmospheres

MSAPMOHS217A Gas Test Atmospheres

This course aims to train participants to be capable of identifying various types of contaminant that may be present in the workplace atmosphere as well as using detection and monitoring equipment to measure levels of contamination.

Designed For

The course is designed for all those who are required to operate gas testing equipment within the workplace.

Expected Outcomes

On completion of this course, participants should be able to:

  • Prepare and plan for monitoring
  • Take precautions to safeguard health
  • Take atmospheric readings
  • Identify TWA, STEL, Peaks, IDLH atmospheres
  • Follow sampling rules
  • Maintain equipment
  • Change sensors in the field
  • Conduct bump and calibration testing of the equipment

Pre-Requisites

There are no pre-requisites for this course.

On Completion

Successful completion of the assessment requirements will provide participants with a Statement of Attainment issued by Falck for MSAPMOHS217A Gas test atmospheres.

Other Information

There is a maximum number of 12 participants per program.
 

  • Photo identification must be provided – Passport, Australian driver’s licence or Proof of Age card only will be accepted.
  • Participants must wear a long sleeve shirt and pants, safety boots or enclosed shoes.

Dates

March              3rd       
April                7th
May                 5th
June                 2nd

 

Member Course Cost    $416
CTF Subsidy                   $248
Total Cost                       $168

Non Member Course Cost  $436
CTF Subsidy                         $248
Total Cost                             $188

This course is delivered by IFAP, RTO #5044

Image result for ifap

 Array
(
)

EVENT DETAILS

Date Fri 3 March 2017
Past Event
Thu 2 March 2017

Women in Civil & WISWA Sundowner

Sundowner invite - CCFWA2 - web

 Array
(
)

EVENT DETAILS

Start Thu 2 March 2017
End Thu 2 March 2017
Past Event
Wed 1 March 2017

Working Safely at Heights

 

This course covers Working Safely at Heights in resources and infrastructure industries.

 

DATES

January            11th      18th      24th      30th
February          8th        13th      24th
March              1st        7th        13th      22nd      31st     
April                3rd        11th      21st      27th     
May                 3rd        11th      17th      26th      31st     
June                 7th        16th      21st      30th      

 

(more…)

 Array
(
    [0] => Array
        (
            [date_issued] => 
            [file] => http://www.ccfwa.com.au/wp-content/uploads/2014/10/TRN-PRO-016-FRM-07-Enrolment-Form_4.pdf
            [name] => Training Enrolment Form
        )

    [1] => Array
        (
            [date_issued] => 
            [file] => http://www.ccfwa.com.au/wp-content/uploads/2014/08/CCF-Terms-Conditions-for-Short-Course-Bookings.pdf
            [name] => Terms & Conditions for Short Courses
        )

)

EVENT DETAILS

Date Wed 1 March 2017
Resources Training Enrolment Form
Terms & Conditions for Short Courses
Venue CCF WA Skill Centre
Address

Jandakot

View Google Map

EVENT ORGANISER

Organiser Alycia Wilkinson
Phone 08 9414 1486
Website http://www.ccfwa.com.au
Email awilkinson@ccfwa.com.au
Past Event

Quick Cut / Concrete Cutting Safety – March

MARCH 1ST

This course is to provide an understanding, working knowledge and requirements for the safe use of a concrete power saw. (more…)

 Array
(
)

EVENT DETAILS

Date Wed 1 March 2017
Past Event
Mon 27 February 2017 – Tue 28 February 2017

Identify, Locate & Protect Underground Services – February

FEBRUARY 27TH & 28TH 

This course aims to enhance the Identify, Locate and Protect Underground Services and contributes towards the evidence requirements of the unit of competency. The Course is endorsed by Dial Before You Dig, and is tailored for Western Australian underground assets.
(more…)

 Array
(
)

EVENT DETAILS

Start Mon 27 February 2017
End Tue 28 February 2017